Competitor HD M&P Slide porting/milling

Send in your slide for custom work

OR

Purchase a complete slide assembly from us

Lead time is approximately 6 weeks for machining, and an additional week for single/dual color Cerakote.

-Pick and choose what work you wish to be performed on your slide.

-Slide must be sent in operational condition without missing internal parts. This is for testing purposes prior to shipment back to the customer.

-If sending a threaded barrel of your own and you wish to have chopped and recrowned, there is an additional charge.

-If you wish to have the work performed on a barrel you currently own, send it in with your slide.

-If chosing an Apex grade hand-fitted barrel, you must send in your locking block. If you do not provide one, we will supply a new OEM one at a $10 rate. You will be responsible for paying the extra incurred cost prior to us shipping the slide back to you. If Apex is out of stock on these, we have to wait until they come back in stock also.

--Barrel of Choice:

     -Apex grade hand-fitted barrel 

     -Apex grade hand-fitted threaded barrel 

-Apex grade options will require a locking block to match for custom fitment. Please send with your slide. 

IF APEX IS OUT OF STOCK ON THESE BARRELS, SO ARE WE. WE HAVE TO WAIT FOR A RESTOCK.

--Barrel porting

Every ounce of performance pulled out of the setup with a 10-port. Ten ports creating an opposing force during recoil, pushing in the opposite direction and helping mitigate perceived recoil. 

--Slide machining

Side inlays that create a more dimensional look

--Upgraded failure resistant extractor 

We only recommend changing these if you're having problems with empty casings being extracted from your chamber. It also helps with ejection patterns if using an SRO optic or similar optic that interferes with ejection.

--Ed Brown skeletonized striker

If Ed Brown is not stocking these, we cannot fulfill this portion of the order and you will be refunded for it.

Produced with less mass for a faster lock time and a lighter trigger pull. This is not needed, but when you are looking to squeeze every ounce of performance out, this would be the last part to upgrade. We will use your stock striker springs and hardware to install this part. Your OEM striker will be returned with your slide setup.

--Barrel flush and crown service 

Service provides a protective edge around the bore of your barrel and provides a reduced length of the barrel. This will create a flushed look of the barrel into your slide. This cost includes a threaded barrel being send in for chopping/crowning also. 

--Captive or uncaptured stainless steel guide rod with flat wire ISMI spring

Leave desired spring rate in the order notes. If none is chosen, we will choose which duty-rated spring to pair with the setup.

Guide rod is user-servicable and will interchange with any industry standard ISMI spring on the market made for the M&P M2.0 full size/compact models.

--Single Cerakote H-Series coating Colors can be found HERE